Editing SmartBox JobList (section)

== 25 ReadSensorTable ==

Read sensor table entry

{|class="calltable"
|Send||
* Byte 0 = entry to read
|-
|Returns||
* Byte 0 = sensor number
* Byte 1 = number of decimal points to display
* Byte 2 = max adc reading
* Byte 3 = reading offset (LSB)
* Byte 4 = reading offset (MSB)
* Byte 5 = multiplication factor (LSB)
* Byte 6 = multiplication factor (MSB)
* Byte 7 = division factor (LSB)
* Byte 8 = division factor (LSB)
* String = full sensor title
* String = abbreviated sensor label
* String = sensor label
* String = sensor units
|-
|Notes||
If byte 0 is &FF then sensor is unknown
|-
|OS Release||
3,4
|}