Editing Analogue Sensor Ports (section)

=== Sensor IDs ===

There are 32 possible sensor IDs. The ADC reading mentioned in the table below is the minimum value that will cause the Smart Move software to identify a particular sensor, for example a humidity sensor can be identified with an ADC reading between 157 and 164.

Note that Smart Move 1.16 and Smart Move 1.18 have some different names for some sensors. If a space is left blank in the table then the sensor is treated as present but is labelled "SENSORA" to "SENSORD" instead of being renamed according to the sensor type.

{|class="wikitable"
!ADC!!Smart Move 1.16!!Smart Move 1.18
|-
|0||''No sensor''||''No sensor''
|-
|5||mT|| 
|-
|13||mm||Temp
|-
|21||No sensor||No sensor
|-
|29||No sensor||No sensor
|-
|37||Temp||Volts
|-
|45||Temp||Temp
|-
|53||mA||Volts
|-
|61||Sound||Temp
|-
|69||Sound||Sound
|-
|77||Sound||PH
|-
|85||Pulse|| 
|-
|93||Position||Position
|-
|101|| || 
|-
|109|| || 
|-
|117|| || 
|-
|125||Light||Light
|-
|133|| || 
|-
|141|| || 
|-
|149|| || 
|-
|157||Humidity||Humidity
|-
|165|| ||Sound
|-
|173|| ||Light
|-
|181||Pressure||Sound
|-
|189|| || 
|-
|197||PH||Atmos
|-
|205|| ||Light
|-
|213|| ||User
|-
|221||Adaptor||Adaptor
|-
|229||Lux||Temp
|-
|237||Volts||LGate
|-
|245||Wind|| 
|-
|253||Temp||Temp
|}