Editing Technical Specification (section)

== Equipment Operation ==

A reset button, marked RESET, is located on the rear panel of the box.
On the standard Smart Box, press this button once to clear the internal program memory.
On the Smart Box ''EV'', press the button once to clear the procedure that is running and restart the main procedure.
Press the button twice to clear the internal program memory.

The information presented in the [[Sensors]] and [[Outputs]] sections of this Smart Box manual identifies suitable accessories for use with the equipment.

Identification symbols used on the equipment are in accordance with regulation IEC 417.

In the event of fuse failure, release the fuse carrier which is integral to the IEC socket on the rear panel.
Remove the fuse, and replace it with a T 500mA 20mm fuse (IEC 127 code).
In 110V versions of Smart Box, use a T 1A 20mm fuse.

Clean the case with a dry cloth. Do not use liquid cleaning materials.

Note that if the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.