Editing Tutorial (section)

== Contents ==

The following sections of this guide take you through creating your first program, and provide a number of example procedures.
The language commands are detailed in full in the [[reference]] section.

Make sure that Smart Box and your computer are correctly connected and switched on (see [[Setting up#Setting up procedure|Smart Box setting up procedure]]), then load the Smart Move software.

[[File:Tutorial-fig01.png|frame|none|fig. 1]]

Once loaded you will see the main Smart Move screen as shown in fig. 1.
The top of the screen is the monitor window.
This area of the screen displays the current state of the various inputs and outputs.
The bottom section of the screen is the text window.
You use this window to type in commands.
Any values you ask Smart Move to print will also be displayed here.

* [[Switching outputs on and off]]
* [[Procedures]]
* [[Repeating actions]]
* [[Variables]]
* [[Procedures within procedures]]
* [[Saving procedures]]
* [[Loading procedures]]
* [[Using sensors]]
* [[Making decisions]]
* [[Data capture]]
* [[Average]]
* [[Controlling a motor]]
* [[Varying power and pulsing outputs]]
* [[Printing procedures]]