Editing Using sensors

You can attach various sensors to Smart Box and then write a Smart Move program which uses the reading from a sensor to determine whether or not to carry out a command.
The sensors will return a value when you ask Smart Move to check them.
The digital sensors will return either a 1 or a 0, the analogue sensors will return a number dependent on the reading from the sensor.

Connect the temperature sensor into sensor socket A.

[[File:Tutorial-Using-Temperature-Sensor.svg|frame|none|fig. 10]]

You will notice that the screen display changes to show the sensor name.

Type PRINT Temp < Enter >

A reading from sensor A will be printed in the output window.
You can use the sensors in a number of ways.
The program can wait for a sensor to change before doing something, or you can choose between two actions depending on the sensor state.

[[Category:Tutorial]]